How to use the Setup checklist

To use the Setup checklist on Dinesurf, open Account, then Setup checklist, and hit Start on any step to open the page that finishes it.

Checked 22 Nov 2026

Steps

The Setup checklist page. 1 marks the count of steps done, 2 the first step, and 3 its Start button.
  1. Open Setup checklist

    Go to Account, then Setup checklist. The red count on the tab, such as 0/7, shows how many of the seven steps are done.

  2. Check your progress

    On a computer, Setup Progress on the left shows how far along you are as a percentage, with a tick beside each area that turns green once it is done.

  3. Pick a step

    Each step on the right is one job, from "Add photos of your restaurant" to "Set up table management". Do them in any order.

  4. Hit Start

    Dinesurf opens the page where you do that job. For photos, that is your Business profile.

  5. Finish the job

    For photos, open Media, upload images under Restaurant images, then hit Save changes.

  6. Come back to check

    Open Setup checklist again. A finished step shows a green tick instead of Start, and your progress goes up.

Steps

  1. Open Home

    Right after you create your restaurant in the app, Home shows "Let's get" and your restaurant's name, followed by "online", with five steps below.

  2. Check your progress

    The card at the top says how ready your site is to share, as a percentage, with the number of steps done, such as 2/5.

  3. Tap a step

    The first unfinished step is marked Next. Tap any step to open the screen that finishes it, then go back to Home.

  4. Finish later if you like

    Tap "I'll finish later" to swap the checklist for your normal Home. It does not come back on that phone, but each job can still be done from its own screen.

Open the Setup checklist

Go to Account, then Setup checklist. While setup isn’t finished, a red dot shows on Account and a red count, such as 0/7, shows on the Setup checklist tab. The count is how many of the seven steps are done.

On a computer, there is a second way in. A round green counter sits in the bottom corner of Overview, showing the same count. Hover over it to see Complete Setup, how complete you are as a percentage, and up to three remaining tasks. Choose it to open the checklist.

All three reminders go away once every step is done. The checklist page itself stays under Account, so you can always come back to it.

Every part of this page

  • Restaurant Setup and Setup Progress (on a computer, on the left): how far along you are, as a percentage of the seven steps.
  • The list of areas (on a computer, under Setup Progress): Photos, Online menu, Guestbook, Event management, Order management, Reservation and Table management. The tick beside each one is grey until that area is done, then it turns green.
  • Upgrade to Pro banner: this is about your Dinesurf plan, not a setup step. To see or change your plan, an owner, manager or finance member can go to Account, then Billing & plan.
  • The seven steps: each one is a job with its own Start button. When a step is done, Start is replaced by a green tick and the step’s name turns green.

On a phone, the left side is hidden, so you see the Upgrade to Pro banner and the seven steps. Your progress is the count on the Setup checklist tab.

Every step, where Start takes you, and when it is ticked

Hitting Start never ticks a step by itself. It only opens the page where you do the job.

  • Add photos of your restaurant: opens your Business profile. Open Media, upload images under Restaurant images, then hit Save changes. Ticked once you have at least one restaurant image. See Fill in your business profile.
  • Upload or create your online menu: opens Menu. Ticked once at least one dish on your menu is switched on.
  • Upload your guests data (CSV file): opens Guestbook, where Import Contacts brings in your guest list from a file. To check the import worked, look for your guests in the Guestbook list.
  • Create and publish your first event: opens Events. Ticked as soon as you have created an event.
  • Turn on menu ordering and start receiving orders: opens Orders. Ticked only while the Taking orders switch at the top of Orders is on. That switch lets guests place online pickup and delivery orders, so turn it on only when you are ready for them.
  • Setup your reservation page: opens Reservations. Ticked once your reservation settings have been saved, such as your booking times. See Set booking times and duration.
  • Set up table management: opens Tables. Ticked once you have at least one table.

You can do the steps in any order, and you don’t have to do all of them. If your restaurant doesn’t run events or take orders, for example, those steps simply stay open, and the count stays on the tab.

Use the checklist in the Dinesurf app

When you create your restaurant in the Dinesurf app, Home shows a checklist made for getting your website ready to share. It has five steps instead of seven:

  • Set up your menu: snap a photo of your real menu. Ticked once at least one dish is switched on, the same as on the dashboard.
  • Add your opening hours: ticked once at least one day has opening hours. See Set your opening hours.
  • Add your logo: ticked once your restaurant has a logo.
  • Add a few photos: ticked once you have at least one restaurant image, the same as on the dashboard.
  • Get your website live: pick a template and go live. Ticked once your website is set up.

The card at the top shows how ready your site is to share, as a percentage, and how many steps are done, such as 2/5. The first unfinished step is marked Next. Finished steps get a tick and are crossed out. Tap any step to open its screen. When you go back, Home checks your steps again.

The checklist stays on Home until all five steps are done or you tap I’ll finish later. Either way, it then gives way to your normal Home on that phone and does not come back. Each job can still be done from its own screen, and the full checklist is always on the dashboard.

The app only shows this checklist for a restaurant created on that phone. People whose role doesn’t include the overview, such as hosts, see their own Home instead.

What happens next

  • Steps tick on their own. Once a job is done, open Setup checklist again. The step shows a green tick, and on a computer Setup Progress grows. The count on the tab catches up the next time you open Overview or reload the dashboard.
  • Nobody is told. The checklist is just a guide for your team. Opening it or seeing a step ticked sends no message to anyone.
  • It keeps checking. Each step is checked again every time the page opens. If you later switch off ordering or remove all your tables, for example, that step goes back to Start.

Common problems

  • I hit Start but the step is still not ticked. Start only takes you to the right page. Finish the job there, and save it if the page has a save button.
  • Start opened a page I can’t use. Your role can’t make that change. Ask an owner or manager to do that step.
  • My menu step won’t tick. At least one dish has to be switched on. A menu where every dish is switched off doesn’t count.
  • The count on the tab hasn’t changed. Open Overview or reload the dashboard. The checklist page itself always shows the latest.
  • My photos step won’t tick. Only images under Restaurant images count. Make sure you hit Save changes after uploading.
  • There is no Save changes button on Media. Your role can’t change the Business profile. Ask an owner or manager.
  • The checklist disappeared from the app. Someone tapped “I’ll finish later”, or all five steps are done. Use Account, then Setup checklist, on the dashboard instead.

Common questions

Do I tick the steps off myself?

No. There is nothing to tick by hand. Dinesurf checks what is really set up, such as a photo under Restaurant images or a table on your floor plan. Hitting Start alone does not count.

Do I have to do the steps in order?

No. Every step has its own Start button, so begin with whichever suits you.

Why is my menu step still not ticked?

The step needs at least one dish on your menu switched on. Dishes that are all switched off don't count.

Does my event have to be published before the step is ticked?

No. The step is ticked as soon as you have created an event.

Does the orders step put ordering live?

Yes. It is ticked only while Taking orders is switched on at the top of Orders, and that lets guests place online pickup and delivery orders. Leave it off until you are ready.

What happens when all seven steps are done?

The count on the Setup checklist tab, the red dot on Account and the round counter on Overview all go away. The checklist page stays under Account.

Can a ticked step become unticked?

Yes. Each step is checked again every time you open the page, so switching off ordering or removing all your tables, for example, unticks that step.

Is there a setup checklist in the Dinesurf app?

Yes. If you create your restaurant in the app, Home shows five steps to get your website ready to share, until you finish them or tap "I'll finish later".

Why don't I see the checklist in the app?

The app shows it only for a restaurant created on that phone, and only until its five steps are done or someone taps "I'll finish later". Hosts see their own Home instead. The dashboard checklist is always under Account.

Who can do this: Anyone on your team can open it. Some jobs it links to need a role that can make that change.

Still stuck?

Our team replies on WhatsApp.

Talk to support