How to set booking times and duration
To set booking times and duration on Dinesurf, open Reservation settings, choose a Time interval and a Reservation Duration, then hit Save changes.
Reservations3DashboardMobile appSteps

- 1Open Reservation settings
Go to Operations, then Reservations, and open Reservation settings. It opens on General, with Reservation Time and Duration near the top.
- 2Choose a Time interval
Open Time interval and choose the gap between the booking times guests can pick, from 15 to 240 minutes.
- 3Choose a Reservation Duration
Open Reservation Duration and choose how long each booking keeps its table or seats.
- 4Hit Save changes
The button is at the top of the page. You see "Settings updated successfully".
- 5Set hours for one date, if you need to
Under Specific Reservation hours, hit Setup Specific hours. Pick the day, tick or untick times, and hit Save Changes in that window. This changes your opening hours for that date.
Steps
- 1Open Reservation settings
In the Dinesurf app, tap More at the bottom, then Settings. Under Operations, tap Reservation settings.
- 2Open the Time tab
Tap Time in the row of tabs at the top. The section is called Time & Duration.
- 3Choose a Time Slot Interval
Pick the gap between booking times, from 15 minutes to 4 hours.
- 4Choose a Default Reservation Duration
Pick how long each booking lasts, from 15 minutes to 4 hours.
- 5Tap Save Changes
Tap Save Changes at the bottom, or Save at the top. You see "Settings saved successfully".
Set the time interval and duration on the dashboard
Go to Operations, then Reservations, and open Reservation settings. The page opens on General. Reservation Time and Duration is the next section after the reservation switch and any area settings.
Open Time interval and choose the gap between booking times. With 30 minutes, guests can book at 12:00, 12:30, 1:00 and so on, through your opening hours. Then open Reservation Duration and choose how long each booking lasts.
Nothing is kept until you hit Save changes at the top of the page. You see “Settings updated successfully”, and new bookings follow the new times and length from then on.
If reservations are switched off for your restaurant, General only shows the reservation switch and the note “Change Reservation Status to access the settings below”. Switch reservations on first. See Turn online bookings on or off.
Every field on this form
- Time interval. The gap between the booking times guests can pick, counted from when you open. Choose from 15 to 240 minutes, in steps of 15. A short gap gives guests more times to choose from. A longer gap spaces arrivals out for your kitchen. If it was never set, Dinesurf uses 15 minutes.
- Reservation Duration. How long each booking keeps its table, or its seats if your restaurant counts bookings by number of guests. When that time is up, the table or seats can go to the next booking. Choose from 15 to 240 minutes. Pick about how long a typical meal takes at your place.
- None. The first choice in both lists. It does not clear the setting: your last saved time stays when you save.
- Specific Reservation hours. A card with the Setup Specific hours button, for changing your opening hours on one date. It saves on its own, apart from Save changes. See the next section.
- Save changes. At the top of the page. It saves everything on General and Deposits together. It is greyed out for a moment while the page loads your latest settings.
Just below this section, Keep seated guests until they leave changes what happens when the duration runs out for a party that is still seated. When it is on, they stay on their table until your team closes them, and anyone still seated is released at the end of the night. In the app, it sits on the same Time tab.
Set different hours for one date
Use this for a special date, such as closing early on a holiday or opening later for a private event in the morning.
- Under Specific Reservation hours, hit Setup Specific hours. A window called Specific reservation hours opens.
- Open Select your desired day and choose the date. It starts on today, and Today in the calendar jumps back to it. Clear empties the box, and the window won’t save until you pick a day again.
- Under Available Time Slots, every time of the day is listed at your saved Time interval. The times inside that day’s opening hours are already ticked, or the hours you already set for that date.
- Tick Show based on only opening hours to hide the times outside your opening hours, so the list is shorter. Type in Search for a time slot to find one time fast, such as “09:30”.
- Tick the times you want and untick the ones you don’t. Each unbroken run of ticked times becomes one stretch of opening hours, from the first ticked time to the last. To close early, untick the latest times. To close for a break, leave a gap between two runs.
- Hit Save Changes at the bottom of the window. You see “Operating hours updated successfully”.
For that date only, the times you saved replace your usual opening hours. This is your restaurant’s opening hours, not just its booking hours: guests can only book inside them, and Dinesurf shows you as open or closed by them. Every other day keeps your usual hours. Open the same date again to change it. The date also shows under Specific date in your opening hours, where you can remove it to go back to your usual hours. See Set your opening hours.
Things to know:
- Save your Time interval first. The window lists times at your saved interval, so if you change Time interval, hit Save changes before you open Setup Specific hours.
- The last ticked time is when the stretch ends. No booking starts at that time. For example, if 12:00 PM to 9:00 PM are ticked, the last booking time is one interval before 9:00 PM. A time ticked on its own opens just that one booking time.
- Check the ticks before you save. If you’re open past midnight, or your hours start or end at a time that isn’t in the list, the window can’t show those hours, and saving would cut them. Set that date under Specific date in your opening hours instead.
- Bookings already made stay. Shorter hours or a closed date don’t move or cancel bookings already made for that date, and their guests are not told. Check that date’s bookings and contact those guests yourself.
To take no bookings on a date, untick every time and save. Your restaurant then has no opening hours that date, and your experiences don’t run on it either.
Change it in the Dinesurf app
Tap More at the bottom of the app, then Settings. Under Operations, tap Reservation settings, then tap the Time tab at the top. The section is called Time & Duration.
- Time Slot Interval is the gap between booking times.
- Default Reservation Duration is how long each booking lasts.
Both lists go from 15 minutes to 4 hours, shown as times like “1h 15m” or “2 hours”. Tap Save Changes at the bottom, or Save at the top right. Both only show once you have changed something. You see “Settings saved successfully”. If you go back before saving, the app asks whether you want to leave and lose your changes.
Hours for one date aren’t on this screen. In the app, set them in your opening hours instead.
What happens next
- Guests see the new times. Online booking times follow your new interval straight away. On today’s date, times that have already passed are not offered.
- Your team sees them too. When your team adds a booking, the times it suggests follow the same interval.
- New bookings get the new length. Each booking made after you save keeps its table or seats for the new duration. Bookings already made keep the length they were booked with.
- Experiences keep their own times. An experience with its own gap between arrivals uses that, and one with a time the table is held until uses that. Where it has neither, it uses your Time interval and your Reservation Duration.
- Nobody is sent a message. Changing these settings, or the hours for one date, does not contact your guests, even those already booked.
Common problems
- You can’t find Reservation settings, or there is no Save changes button. Your role can’t change reservation settings. Owners, managers and operations staff can.
- You can’t see Reservation Time and Duration. Reservations are switched off. Switch on the reservation switch at the top of General first.
- Your new interval or duration went back. You left the page without hitting Save changes, or you chose None. Choose the time again and save.
- The one-day window shows the old gap between times. You changed Time interval but didn’t save it. Close the window, hit Save changes, then open Setup Specific hours again.
- Guests can’t book a date at all. Check Setup Specific hours for that date. If every time is unticked, the date has no opening hours. Also check your weekly hours and the dates under Specific date. See Set your opening hours.
Common questions
What choices do I have for the time interval and the duration?
Both go from 15 minutes to 240 minutes (four hours), in steps of 15 minutes. On the dashboard each list also has None, which leaves your saved choice as it is.
Does changing the duration change bookings I already have?
No. Each booking keeps the length it was given when it was made. The new duration applies to bookings made after you save.
Can I take bookings at different times on one date?
Yes. Under Specific Reservation hours, hit Setup Specific hours, pick the date, tick the times you want and hit Save Changes in that window. Only that date changes. The times become your restaurant's opening hours for that date, not just its booking hours.
How do I stop taking bookings on one date?
In Setup Specific hours, pick the date and untick every time, then hit Save Changes. Your restaurant is then closed that date, so no booking times are offered and your experiences don't run. Bookings already made for that date stay, and their guests are not told, so contact them yourself.
Do experiences follow these settings?
An experience can have its own gap between arrivals and its own time the table is held until. Where it has none of its own, it uses your Time interval and your Reservation Duration.
Can I change these settings from my phone?
Yes. In the Dinesurf app, tap More, then Settings, then Reservation settings, and open the Time tab. Change Time Slot Interval or Default Reservation Duration and tap Save Changes.
Who can change these settings?
Owners, managers and operations staff. Hosts can take and change bookings but can't change reservation settings.
Who can do this: Owners, managers and operations staff.