How to seat a walk-in

To seat a walk-in on Dinesurf, open Operations, then Tables, open a free table and choose how many guests under Walk-in: how many?

Checked 22 Nov 2026

Steps

The Tables screen with a free table's card open. 1 marks the Tables tab, 2 the table you opened, T3, and 3 the party size under Walk-in: how many?
  1. Open Tables

    Go to Operations, then Tables. On a phone, hit Tables at the top to see every table. On a computer, the tables sit beside the To seat and Seated list.

  2. Find a free table

    Each area says how many of its tables are free. With several areas, pick one in the area bar, or All to see every table. The bar sits at the bottom of the plan on a computer, and above the tables on a phone. A table showing a guest's name and a time is held for a booking due soon.

  3. Open the table

    The card shows the table's name, Free, and how many it seats. Next here shows its next booking, so check the walk-in will be done by then.

  4. Choose how many under Walk-in: how many?

    Hit the size of the party. One tap seats them, with no confirmation. For six or more, hit 6+, set the number, then hit Seat.

  5. Look after them

    Open their table again to change Guests, Add a name, Move, Add a table, Swap or add +30 min. When they go, hit They've left.

Steps

  1. Open Tables & floor

    Tap More, then Tables & floor. On a phone, tap Tables at the top to see every table.

  2. Tap a free table

    Tap the table the guests will sit at. Next here shows its next booking, so check the walk-in will be done by then.

  3. Choose how many under Walk-in: how many?

    Tap the size of the party. One tap seats them. For six or more, tap 6+, set the number, then tap Seat.

  4. Capacity-based? Use Walk-in

    If your restaurant counts bookings by guests, you can also tap Walk-in at the top, choose how many, then the area under Where? if you have more than one. They are seated without a table.

Seat a walk-in at a free table

This is the usual way. Open Tables, open the table the guests will sit at, and choose the size of the party under Walk-in: how many? The walk-in is seated straight away. It works the same in a Table-based or a Capacity-based restaurant, and in every area.

Seat a party of six or more

The last size button is 6+. Hit it, and a plus and minus appear, starting at six. Set the number, then hit the green button, such as Seat 8. If one table is too small, seat them at the biggest one, then open their table and choose Add a table to join another.

Seat a walk-in at a table that already has guests

Open the seated table and choose Seat another party here. The card asks Another party: how many? (in the app, it names the table). Choose the size, or hit Back to leave it. Each party keeps its own bill, and gets its own letter on the table number, such as 4A and 4B. Dinesurf refuses if the table is already full, or if the party there sits across several tables.

Seat a walk-in without a table (app, Capacity-based)

In the Dinesurf app, a restaurant that counts bookings by guests has a Walk-in button at the top of Tables & floor. Tap it, choose how many, then choose the area under Where? if you have more than one. The party is seated without a table.

Every part of the table card

  • The head: the table’s name, its state (such as Free), how many it seats and its area.
  • Held for: shows when the table is kept for a booking due soon or running late. You can still seat a walk-in there. See below.
  • Blocked to: shows when the table is blocked for a time. Open it to see the block.
  • Bill open (in the app, Tab open): someone has an open bill at this table. It won’t take a walk-in until that bill is closed or moved. In the app, roles that can take orders also see what is on the bill, with Open POS, Move tab and Close tab.
  • Walk-in: how many?: one button for each size, from 1 to 5, then 6+. Sizes that fit the table are bold. Lighter sizes don’t fit, but you can still choose them. One tap seats the party.
  • The plus and minus, and Seat: only after you hit 6+. Set the number, then hit Seat.
  • Or someone booked: a guest who is running late or due within the hour, and fits the table. Hit Seat with their name to seat them here instead of a walk-in. Unlike a walk-in, a booked guest can get a message. A booking not yet approved is approved first, which tells your guest, and they also get your menu if you send it on seating.
  • Bring back: shows when the last party at this table was marked as left. Hit it if they had not really gone.
  • Next here: the table’s next booking tonight, or “nothing booked tonight”. Check the walk-in will be done by then.

On a bar stool, a size of 2 or more also takes the next free stools, and the button shows which. On the web, a stool offers sizes 1 to 4.

What happens next

The table shows as taken, with Walk-in and the time they have left. A message at the bottom says, for example, “Walk-in of 2 seated at T3”, with an Undo button for a few seconds. The walk-in also appears under Seated. Nothing is sent to them, because a walk-in has no contact details.

They get your usual booking time. Open their table to:

  • change Guests with the plus and minus, if more people join or some leave,
  • choose Add a name to save their name and phone number to your guest book,
  • Move them to another table, Add a table, or Swap with another party,
  • give them +30 min more,
  • choose Seat another party here to share the table,
  • in the app, choose Take their order to start their bill, if your role takes orders,
  • or hit They’ve left when they go. The table is free again, unless their bill is still open.

If someone booked is due at this table, or waiting for one, They’ve left · seat their name here clears the table and seats them in one tap. Use it only once the walk-in has really gone.

When their time runs out, the table shows as over time. Half an hour later Dinesurf frees the table, unless they have an open bill or your restaurant keeps seated guests until they leave.

Before you use a held or blocked table

A table showing a guest’s name and a time is held for a booking due within 45 minutes, or running late. You can still seat a walk-in there, but that booking loses the table. Dinesurf gives it another free table that fits, or leaves it waiting for a table, and your guest is not told. Hit Undo straight away if you did not mean to.

A blocked table also takes a walk-in as soon as you choose a size, so pick another table unless you mean to use it.

Common problems

  • No sizes on the card: the screen is not on tonight, live, or your role cannot run the floor. Ask an owner or manager.
  • “T3 has an open bill. Pick another table.”: someone’s bill is still open at that table. Choose another table, or close or move the bill first.
  • Someone is already sitting there: you see their details instead. Choose Seat another party here to share the table. If Dinesurf offers They’ve left and seating someone there, use it only if those guests have really gone, because it ends their visit.
  • Tapping a table picks it instead of opening it: a booked guest’s card is open, so the tap chooses a table for them. Close their card first.
  • No tables yet: nobody can be seated at a table until your areas and tables are set up.

Common questions

Can I add the walk-in's name?

Yes. Once they are seated, open their table and choose Add a name. Type a name, a phone number, or both, then hit Save. They join your guest book. Saving a name sends nothing to your guest. If the number belongs to someone Dinesurf already knows, the visit is added to that guest.

What if the party is six or more?

Hit 6+, set the number with the plus and minus, then hit the Seat button, such as Seat 8. If they need more room, open their table once they are seated and choose Add a table. On the web, a bar stool only offers 1 to 4, so choose a table instead.

What if I chose the wrong size?

Open their table and change the number of guests with the plus and minus. In the first few seconds you can also hit Undo on the message at the bottom of the screen, which removes the walk-in so you can seat them again.

Can I seat a walk-in at a table that already has guests?

Yes, if it has a seat left. Open the table, choose Seat another party here, then choose how many. Each party gets its own letter on the table number, such as 4A and 4B, so their bills stay apart. Dinesurf refuses if every seat is taken or the party there sits across several tables. It does not check that the new party fits the seats left, so count them first.

Does a walk-in get a message from us?

Not when they sit down. A walk-in seated from the Tables screen has no contact details, so nothing is sent. Adding their name and number sends nothing either. One exception is your loyalty program. If it counts visits and the number belongs to a guest it already knows, the visit can count on their card, and they may get a message about it when they leave.

We count bookings by guests. Can we still seat walk-ins?

Yes, once your tables are set up. On the web, open a table and choose how many, as for any restaurant. In the app, a Capacity-based restaurant also has a Walk-in button at the top of Tables, which seats the party without a table.

Why don't I see the walk-in sizes?

They only show on tonight's screen at the current time, and only for roles that can run the floor. Owners, managers, operations and hosts can. If you picked another date, hit Back to tonight. If you picked another time, open it and hit Back to live.

Who can do this: Owners, managers, operations and hosts.

Still stuck?

Our team replies on WhatsApp.

Talk to support